Ukraine
Uzbekistan
Poland
South Africa
Nigeria
German
Tłumaczymy stronę. Proszę czekać
Step-up Power Supply Module 1800W 30A DC-DC Step Up Module
Sprawdź w chińskim sklepie
Cena
3,54 $
3,54 $
Produkt
757086666381
O produkcie
- marka Inny
- sortuj według koloru 30A DC-DC 3S 40A Balanced 3S 40A Enhanced 4S 40A Balanced 4S 40A Enhanced
- Odpowiedni Inny
Sprzedawca tb7668708522
- Imię tb7668708522
- Sklep tb7668708522的小店
- Znajduje się 浙江杭州
- Opinie 0
- Pozytywnych 0
- Ocena dostaw Sprzedawcy 5,00
- Ocena towarów Sprzedawcy 5,00
- Ocena usług Sprzedawcy 5,00
- 100 — 1999 шт 5000$/szt
- 2000 — 50119 шт 4000$/szt
- 50120+ шт 3000$/szt
Liczba sztuk 200 szt.
3,54
$
+ Dostawa na terenie Chin
1,17$
Produkt niedostępny
Weryfikacja + fotorelacja za 1.50$
Weryfikujemy zamówione towary i robimy fotorelację, abyś miał/a pewność, że zamówione przez Ciebie towary nie posiadają żadnych wad i są zgodne z opisem.
Dodaj usługę fotorelacji
Dostawa z Chin do Ukrainy, Uzbekistanu, krajów Unii Europejskiej.
Dostawa płatna, po przybyciu paczki do magazynu w Chinach
Zwrot towaru jest możliwy tylko wtedy, kiedy paczka znajduje się w naszym magazynie w Chinach. Po wysyłce paczki z Chin, produkty nie podlegają zwrotowi.
Zdjęcia oraz opis towaru
Power Converter Step Up Module 1800W 30A DC-DC Step Up Module DC10-60V 12-90V Adjustable Temperature Control Fan Voltage Charger
Feature:
1. High Power Output: The power supply utilizes four 1.2mm pure copper wires wound around double iron-silicon-aluminum s and a 100V/210A low impedance MOS, making it suitable for high-power LEDs and motors.
2. Protection Function: The power supply comes with input MOS reverse connection and low battery , ensuring that the device is safe to use even when connected incorrectly or when the battery is over-discharged.
3. Temperature Control Fan: The hydraulic bearing fan used in the power supply offers an excellent balance between noise levels and heat dissipation. When the load temperature reaches approximately 60 degrees Celsius, the fan automatically turns on, reducing noise, and extending the device's lifespan.
4. High-quality Isolation Board: The main power tube insulation board of the power supply uses premium aluminum oxide, which has ten times the thermal conductivity of ordinary insulating pads.
5. Versatile Usage: This power supply can be used to charge your electric bike, boost car batteries, increase solar panels' voltage, or serve as a mobile power source for laptops and other digital devices. It can also help increase the range of electric vehicles by boosting the battery voltage.
Specification:
Origin: Mainland China
Module nature: Non isolated boost module (BOOST)
Input voltage: DC10-60V
Input current: 10-30V input voltage, maximum current 30A, 31-60V input voltage, maximum current 25A
Static working current: 15mA (when 12V rises to 20V, the higher the output voltage, the more static current will increase)
Output voltage: 12-90V continuously adjustable (default output is adjusted to 19V for shipment, please specify if it needs to be adjusted to other voltage values. If there is a multimeter, buyers can adjust it themselves) 12-90V fixed output (for bulk customers)
Output current: 20A MAX If it exceeds 15A, please sngthen heat dissipation (related to the input and output pressure differences, the larger the pressure difference, the smaller the output current)
Output power: =input voltage * 30A, for example: input 12V * 30A=360W, the maximum power at input 12V is 360W
Input voltage * 30A, for example: Input 24V * 30A=720W, that is, the maximum power when inputting 24V is 720W
Constant current range: 0.8-20A (+/-0.3A)
Input anti reverse connection: Yes (150A power MOS anti reverse)
Low battery : with (8-50V adjustable) self recovery type
Working temperature: -40~+85 degrees (please sngthen heat dissipation when the ambient temperature is too high)
Working frequency: 150KHz
Conversion efficiency: 92% -97% (efficiency is related to input and output voltage, current, and voltage difference, with low voltage difference and high efficiency)
Input overcurrent : Yes (if the input exceeds 35A, automatic will be provided, and the power supply will not boost)
Short circuit : With dual short circuit (input 30A fuse), it is safer to use.
Input reverse : Yes (150A power MOS transistor anti reverse. Can be reversed for a long time)
Installation method: 43mm copper columns
Wiring method: Terminal bs (please use high current pure copper wire)
Module size:
About 130x52x84mm/5.11x2.04x3.30inch (including copper column and fan)
About 130x52x67mm/5.11x2.04x2.63inch (excluding copper columns and fans)
Module unit weight: 350g
Power description:
Due to the maximum input current of 30A at 10-30V and 25A at 31-60V, the output power of this power supply is related to the input voltage. The higher the input voltage, the higher the power. (The input voltage * input current is equal to the overall power.) For example, the input 12V * 30A power is 360W. The input 24V * 30A power is 720W. When the input voltage is 36V, the maximum input current is 25A. The maximum power of the power supply is 900W
Voltage regulation:
Use a slotted screwdriver to adjust the output terminal "V-ADJ" potentiometer (as shown in the figure below) when the power supply is connected and the load is unloaded. Because the output capacitance is large, the response will be slow when the output voltage is adjusted from high voltage to low voltage. The adjustment range of the instrument is smaller. (The default output voltage is adjusted to 19V for shipment. If you need us to adjust other voltage values, please explain or leave a message)
Current regulation:
Turn the "CC A-ADJ" potentiometer countercwise for about 30 turns, set the output current to the minimum, connect the LED battery and other loads, and turn the "CC A-ADJ" potentiometer cwise to the current you need. For battery charging, after discharging the battery, connect it to the output and adjust CC A-ADJ to the current you need. When charging, be sure to use the discharged battery to adjust it accurately, because the more remaining battery charge, the lower the charging current. The default output power is adjusted to 3A for shipment. If we need to adjust the current value properly, please do not use short-circuit output to adjust the current. The circuit structure of the boost module cannot be adjusted through short-circuit,
Input low battery adjustment:
Low battery is mainly aimed at preventing battery over discharge when the input power supply is a battery. Low voltage should also be set when the battery voltage is too low to damage the power module and when the battery input is a switching power supply:
Method 1: For example, set 12V battery low battery . Connect a 10V voltage to the input terminal of the power module and use a flat screwdriver to adjust RV1 (increase the cwise voltage value and decrease the countercwise voltage value) until the UVLO light is on. At this time, the low battery voltage is 10V. When the battery voltage drops to 10V, the power module does not rise (the input voltage is equal to the output voltage). Only when the input voltage is higher than 10V, the power automatically recovers and starts boosting.
Method 2: Connect the input to the battery or the switching power supply. If the UVLO light on the board is off, turn the RV1 potentiometer countercwise to turn the UVLO light on, and then turn it cwise for two turns. If the UVLO light is on, turn the RV1 potentiometer cwise, turn the UVLO light off, and then turn it two turns. (Suitable for 8V-45V voltage)
Feature:
1. High Power Output: The power supply utilizes four 1.2mm pure copper wires wound around double iron-silicon-aluminum s and a 100V/210A low impedance MOS, making it suitable for high-power LEDs and motors.
2. Protection Function: The power supply comes with input MOS reverse connection and low battery , ensuring that the device is safe to use even when connected incorrectly or when the battery is over-discharged.
3. Temperature Control Fan: The hydraulic bearing fan used in the power supply offers an excellent balance between noise levels and heat dissipation. When the load temperature reaches approximately 60 degrees Celsius, the fan automatically turns on, reducing noise, and extending the device's lifespan.
4. High-quality Isolation Board: The main power tube insulation board of the power supply uses premium aluminum oxide, which has ten times the thermal conductivity of ordinary insulating pads.
5. Versatile Usage: This power supply can be used to charge your electric bike, boost car batteries, increase solar panels' voltage, or serve as a mobile power source for laptops and other digital devices. It can also help increase the range of electric vehicles by boosting the battery voltage.
Specification:
Origin: Mainland China
Module nature: Non isolated boost module (BOOST)
Input voltage: DC10-60V
Input current: 10-30V input voltage, maximum current 30A, 31-60V input voltage, maximum current 25A
Static working current: 15mA (when 12V rises to 20V, the higher the output voltage, the more static current will increase)
Output voltage: 12-90V continuously adjustable (default output is adjusted to 19V for shipment, please specify if it needs to be adjusted to other voltage values. If there is a multimeter, buyers can adjust it themselves) 12-90V fixed output (for bulk customers)
Output current: 20A MAX If it exceeds 15A, please sngthen heat dissipation (related to the input and output pressure differences, the larger the pressure difference, the smaller the output current)
Output power: =input voltage * 30A, for example: input 12V * 30A=360W, the maximum power at input 12V is 360W
Input voltage * 30A, for example: Input 24V * 30A=720W, that is, the maximum power when inputting 24V is 720W
Constant current range: 0.8-20A (+/-0.3A)
Input anti reverse connection: Yes (150A power MOS anti reverse)
Low battery : with (8-50V adjustable) self recovery type
Working temperature: -40~+85 degrees (please sngthen heat dissipation when the ambient temperature is too high)
Working frequency: 150KHz
Conversion efficiency: 92% -97% (efficiency is related to input and output voltage, current, and voltage difference, with low voltage difference and high efficiency)
Input overcurrent : Yes (if the input exceeds 35A, automatic will be provided, and the power supply will not boost)
Short circuit : With dual short circuit (input 30A fuse), it is safer to use.
Input reverse : Yes (150A power MOS transistor anti reverse. Can be reversed for a long time)
Installation method: 43mm copper columns
Wiring method: Terminal bs (please use high current pure copper wire)
Module size:
About 130x52x84mm/5.11x2.04x3.30inch (including copper column and fan)
About 130x52x67mm/5.11x2.04x2.63inch (excluding copper columns and fans)
Module unit weight: 350g
Power description:
Due to the maximum input current of 30A at 10-30V and 25A at 31-60V, the output power of this power supply is related to the input voltage. The higher the input voltage, the higher the power. (The input voltage * input current is equal to the overall power.) For example, the input 12V * 30A power is 360W. The input 24V * 30A power is 720W. When the input voltage is 36V, the maximum input current is 25A. The maximum power of the power supply is 900W
Voltage regulation:
Use a slotted screwdriver to adjust the output terminal "V-ADJ" potentiometer (as shown in the figure below) when the power supply is connected and the load is unloaded. Because the output capacitance is large, the response will be slow when the output voltage is adjusted from high voltage to low voltage. The adjustment range of the instrument is smaller. (The default output voltage is adjusted to 19V for shipment. If you need us to adjust other voltage values, please explain or leave a message)
Current regulation:
Turn the "CC A-ADJ" potentiometer countercwise for about 30 turns, set the output current to the minimum, connect the LED battery and other loads, and turn the "CC A-ADJ" potentiometer cwise to the current you need. For battery charging, after discharging the battery, connect it to the output and adjust CC A-ADJ to the current you need. When charging, be sure to use the discharged battery to adjust it accurately, because the more remaining battery charge, the lower the charging current. The default output power is adjusted to 3A for shipment. If we need to adjust the current value properly, please do not use short-circuit output to adjust the current. The circuit structure of the boost module cannot be adjusted through short-circuit,
Input low battery adjustment:
Low battery is mainly aimed at preventing battery over discharge when the input power supply is a battery. Low voltage should also be set when the battery voltage is too low to damage the power module and when the battery input is a switching power supply:
Method 1: For example, set 12V battery low battery . Connect a 10V voltage to the input terminal of the power module and use a flat screwdriver to adjust RV1 (increase the cwise voltage value and decrease the countercwise voltage value) until the UVLO light is on. At this time, the low battery voltage is 10V. When the battery voltage drops to 10V, the power module does not rise (the input voltage is equal to the output voltage). Only when the input voltage is higher than 10V, the power automatically recovers and starts boosting.
Method 2: Connect the input to the battery or the switching power supply. If the UVLO light on the board is off, turn the RV1 potentiometer countercwise to turn the UVLO light on, and then turn it cwise for two turns. If the UVLO light is on, turn the RV1 potentiometer cwise, turn the UVLO light off, and then turn it two turns. (Suitable for 8V-45V voltage)
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1 x Power Converter Step Up Module
Step-up Power Supply Module 1800W 30A DC-DC Step Up Module DC10-60V 12-90V Adjustable Temperature Control Fan Voltage Charger
----------
----------
